dmesg - NVIDIA GeForce GTX 760
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c6a7ffff] usable
BIOS-e820: [mem 0x00000000c6a80000-0x00000000c6a86fff] ACPI NVS
BIOS-e820: [mem 0x00000000c6a87000-0x00000000c7574fff] usable
BIOS-e820: [mem 0x00000000c7575000-0x00000000c785dfff] reserved
BIOS-e820: [mem 0x00000000c785e000-0x00000000dd065fff] usable
BIOS-e820: [mem 0x00000000dd066000-0x00000000dd0eefff] reserved
BIOS-e820: [mem 0x00000000dd0ef000-0x00000000dd2cffff] usable
BIOS-e820: [mem 0x00000000dd2d0000-0x00000000dda07fff] ACPI NVS
BIOS-e820: [mem 0x00000000dda08000-0x00000000deffefff] reserved
BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: ECS Z87H3-A2X EXTREME/Z87H3-A2X EXTREME, BIOS 4.6.5 06/11/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FF0000000 write-back
2 base 0410000000 mask 7FF8000000 write-back
3 base 0418000000 mask 7FFC000000 write-back
4 base 041C000000 mask 7FFE000000 write-back
5 base 041E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 256MB, type WB
reg 2, base: 16640MB, range: 128MB, type WB
reg 3, base: 16768MB, range: 64MB, type WB
reg 4, base: 16832MB, range: 32MB, type WB
reg 5, base: 16864MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16880MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [ffff8800000fd800]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x41ee00000-0x41effffff]
[mem 0x41ee00000-0x41effffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x41c000000-0x41edfffff]
[mem 0x41c000000-0x41edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41bffffff]
[mem 0x400000000-0x41bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc6a7ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xc69fffff] page 2M
[mem 0xc6a00000-0xc6a7ffff] page 4k
init_memory_mapping: [mem 0xc6a87000-0xc7574fff]
[mem 0xc6a87000-0xc6bfffff] page 4k
[mem 0xc6c00000-0xc73fffff] page 2M
[mem 0xc7400000-0xc7574fff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xc785e000-0xdd065fff]
[mem 0xc785e000-0xc79fffff] page 4k
[mem 0xc7a00000-0xdcffffff] page 2M
[mem 0xdd000000-0xdd065fff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xdd0ef000-0xdd2cffff]
[mem 0xdd0ef000-0xdd2cffff] page 4k
init_memory_mapping: [mem 0xdefff000-0xdeffffff]
[mem 0xdefff000-0xdeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35b82000-0x36db8fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000dd9da080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000dd9e81b0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000dd9da190 00E01E (v02 ALASKA A M I 00000024 INTL 20091112)
ACPI: FACS 00000000dda06080 000040
ACPI: APIC 00000000dd9e82c0 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000dd9e8358 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000dd9e83a0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000dd9e88e0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 00000000dd9e93b8 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117)
ACPI: MCFG 00000000dd9e9580 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000dd9e95c0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000dd9e95f8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000dd9e9968 003380 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR 00000000dd9ecce8 000070 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
Initmem setup node 0 [mem 0x00000000-0x41effffff]
NODE_DATA [mem 0x41eff6000-0x41effafff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e600000-ffff88041e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xc6a7ffff]
node 0: [mem 0xc6a87000-0xc7574fff]
node 0: [mem 0xc785e000-0xdd065fff]
node 0: [mem 0xdd0ef000-0xdd2cffff]
node 0: [mem 0xdefff000-0xdeffffff]
node 0: [mem 0x100000000-0x41effffff]
On node 0 totalpages: 4177652
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14078 pages used for memmap
DMA32 zone: 900952 pages, LIFO batch:31
Normal zone: 51136 pages used for memmap
Normal zone: 3272704 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc6a80000-0xc6a86fff]
PM: Registered nosave memory: [mem 0xc7575000-0xc785dfff]
PM: Registered nosave memory: [mem 0xdd066000-0xdd0eefff]
PM: Registered nosave memory: [mem 0xdd2d0000-0xdda07fff]
PM: Registered nosave memory: [mem 0xdda08000-0xdeffefff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88041ec00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4112353
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.13.0/drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: American Megatrends Inc.; Ver: 4.6.5; Product Version: 1.0
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-24-generic #47-Ubuntu
Hardware name: ECS Z87H3-A2X EXTREME/Z87H3-A2X EXTREME, BIOS 4.6.5 06/11/2013
000000000000000b ffffffff81c01de8 ffffffff81715ac4 ffffffff81c01e30
ffffffff81c01e20 ffffffff810676bd ffffffff81fdc01c ffffffff81fdc048
0000000000000000 ffffffff81de02c0 ffffffff81c01fb0 ffffffff81c01e80
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_fmt_taint+0x44/0x50
[] ? early_ioremap+0x13/0x15
[] ? __acpi_map_table+0x13/0x18
[] warn_invalid_dmar+0x7e/0x90
[] check_zero_address+0x68/0xf4
[] detect_intel_iommu+0x15/0xae
[] pci_iommu_alloc+0x4a/0x6c
[] mem_init+0x17/0x9c
[] start_kernel+0x202/0x443
[] ? repair_env_string+0x5c/0x5c
[] ? early_idt_handlers+0x120/0x120
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0x143/0x152
---[ end trace 3c833cf394f7a840 ]---
Memory: 16346184K/16710608K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 364424K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3500.044 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.08 BogoMIPS (lpj=14000176)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
dmar: Host address width 39
dmar: DRHD base: 0x00000000000000 flags: 0x1
dmar: parse DMAR table failure.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (56000.70 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xc6a80000-0xc6a86fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdd2d0000-0xdda07fff] (7569408 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 15:37:13, date: 05/20/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000dd0e4c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000dd0e4618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000dd0e3d98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7600000-0xf760ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf761a000-0xf761a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7618000-0xf76183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7610000-0xf7613fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7617000-0xf76173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7616000-0xf76167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7615000-0xf76150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1187] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf7500000-0xf7500fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf2300000-0xf2303fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:00:01.1: bridge window [mem 0xf2300000-0xf23fffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf7400000-0xf7400fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xf2200000-0xf2203fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xf7300000-0xf7300fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:06:00.0: [1283:8893] type 01 class 0x060401
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:06:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:08:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:08:00.0: reg 0x10: [io 0xa050-0xa057]
pci 0000:08:00.0: reg 0x14: [io 0xa040-0xa043]
pci 0000:08:00.0: reg 0x18: [io 0xa030-0xa037]
pci 0000:08:00.0: reg 0x1c: [io 0xa020-0xa023]
pci 0000:08:00.0: reg 0x20: [io 0xa000-0xa01f]
pci 0000:08:00.0: reg 0x24: [mem 0xf7200000-0xf72001ff]
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:09:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:09:00.0: reg 0x10: [io 0x9050-0x9057]
pci 0000:09:00.0: reg 0x14: [io 0x9040-0x9043]
pci 0000:09:00.0: reg 0x18: [io 0x9030-0x9037]
pci 0000:09:00.0: reg 0x1c: [io 0x9020-0x9023]
pci 0000:09:00.0: reg 0x20: [io 0x9000-0x901f]
pci 0000:09:00.0: reg 0x24: [mem 0xf7100000-0xf71001ff]
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 09]
pci 0000:00:1c.7: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xc6a80000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc7575000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xdd066000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdd2d0000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1c00-0x1cfe] has been reserved
system 00:05: [io 0x1d00-0x1dfe] has been reserved
system 00:05: [io 0x1e00-0x1efe] has been reserved
system 00:05: [io 0x1f00-0x1ffe] has been reserved
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0a00-0x0a0f] has been reserved
system 00:08: [io 0x0a10-0x0a1f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: [io 0x0a50-0x0a5f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:0b: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:00:01.1: bridge window [mem 0xf2300000-0xf23fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.7: PCI bridge to [bus 09]
pci 0000:00:1c.7: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:02: resource 2 [mem 0xf2300000-0xf23fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf7400000-0xf74fffff]
pci_bus 0000:04: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:06: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:06: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:06: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:07: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:07: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:07: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:07: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:07: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:07: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:07: resource 17 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:08: resource 0 [io 0xa000-0xafff]
pci_bus 0000:08: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:09: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:09: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18652K (ffff880035b82000 - ffff880036db9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd9066000-0xdd066000] (64MB) mapped at [ffff8800d9066000-ffff8800dd065fff]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1400600233.460:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31962
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90005c00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7618000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7617000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 47 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:667:639
rtc_cmos 00:06: setting system clock to 2014-05-20 15:37:14 UTC (1400600234)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[144]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 48 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc900018b6000, c0:4a:00:02:61:87, XID 0c200000 IRQ 48
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 49 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
r8169 0000:04:00.0: irq 50 for MSI/MSI-X
r8169 0000:04:00.0 eth1: RTL8168g/8111g at 0xffffc900018be000, c8:9c:dc:f2:d4:02, XID 0c000800 IRQ 50
r8169 0000:04:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: irq 51 for MSI/MSI-X
r8169 0000:05:00.0 eth2: RTL8168g/8111g at 0xffffc900018c8000, 74:27:ea:3a:bd:c2, XID 0c000800 IRQ 51
r8169 0000:05:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616100 irq 49
ata2: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616180 irq 49
ata3: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616200 irq 49
ata4: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616280 irq 49
ata5: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616300 irq 49
ata6: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616380 irq 49
ahci 0000:08:00.0: irq 52 for MSI/MSI-X
ahci 0000:08:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf7200000 port 0xf7200100 irq 52
ata8: SATA max UDMA/133 abar m512@0xf7200000 port 0xf7200180 irq 52
ahci 0000:09:00.0: irq 53 for MSI/MSI-X
ahci 0000:09:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:09:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xf7100000 port 0xf7100100 irq 53
ata10: SATA max UDMA/133 abar m512@0xf7100000 port 0xf7100180 irq 53
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata9: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 3:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata8: SATA link down (SStatus 0 SControl 300)
usb 3-1: new full-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=1532, idProduct=010e
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Razer BlackWidow
usb 3-1: Manufacturer: Razer
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input5
hid-generic 0003:1532:010E.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow] on usb-0000:00:14.0-1/input0
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input6
hid-generic 0003:1532:010E.0002: input,hidraw1: USB HID v1.11 Device [Razer Razer BlackWidow] on usb-0000:00:14.0-1/input1
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.2/input/input7
hid-generic 0003:1532:010E.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow] on usb-0000:00:14.0-1/input2
tsc: Refined TSC clocksource calibration: 3499.996 MHz
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ata10: SATA link down (SStatus 0 SControl 300)
usb 3-12: new high-speed USB device number 4 using xhci_hcd
usb 3-12: New USB device found, idVendor=3322, idProduct=5544
usb 3-12: New USB device strings: Mfr=10, Product=11, SerialNumber=0
usb 3-12: Product: USB 2.0 HUB
usb 3-12: Manufacturer: GENESYS
hub 3-12:1.0: USB hub found
hub 3-12:1.0: 4 ports detected
random: init urandom read with 45 bits of entropy available
init: plymouth-upstart-bridge main process (228) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (238) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (240) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (242) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 3-14: new full-speed USB device number 5 using xhci_hcd
usb 3-14: New USB device found, idVendor=0403, idProduct=6001
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-14: Product: FT232R USB UART
usb 3-14: Manufacturer: FTDI
usb 3-14: SerialNumber: A800fq8V
Adding 16708604k swap on /dev/sda5. Priority:-1 extents:1 across:16708604k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
systemd-udevd[352]: starting version 204
wmi: Mapper loaded
usb 3-12.1: new full-speed USB device number 6 using xhci_hcd
mei_me 0000:00:16.0: irq 54 for MSI/MSI-X
lp: driver loaded but no devices found
usb 3-12.1: New USB device found, idVendor=0cf3, idProduct=3000
usb 3-12.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] Initialized drm 1.1.0 20060810
ppdev: user-space parallel port driver
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
hda-intel 0000:00:1b.0: no codecs found!
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
type=1400 audit(1400600236.040:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=426 comm="apparmor_parser"
type=1400 audit(1400600236.040:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=426 comm="apparmor_parser"
type=1400 audit(1400600236.040:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=426 comm="apparmor_parser"
type=1400 audit(1400600236.040:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=428 comm="apparmor_parser"
type=1400 audit(1400600236.040:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
type=1400 audit(1400600236.040:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
type=1400 audit(1400600236.040:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=426 comm="apparmor_parser"
type=1400 audit(1400600236.040:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=426 comm="apparmor_parser"
type=1400 audit(1400600236.040:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
hda-intel 0000:01:00.1: Enable delay in RIRB handling
usb 3-12.2: new high-speed USB device number 7 using xhci_hcd
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usb 3-12.2: New USB device found, idVendor=0cf3, idProduct=9271
usb 3-12.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 3-12.2: Product: UB91
usb 3-12.2: Manufacturer: ATHEROS
usb 3-12.2: SerialNumber: 12345
usbcore: registered new interface driver ftdi_sio
ftdi_sio 3-14:1.0: FTDI USB Serial Device converter detected
usb 3-14: Detected FT232RL
usb 3-14: Number of endpoints 2
usb 3-14: Endpoint 1 MaxPacketSize 64
usb 3-14: Endpoint 2 MaxPacketSize 64
usb 3-14: Setting MaxPacketSize 64
usb 3-14: FTDI USB Serial Device converter now attached to ttyUSB0
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
usb 3-12.2: ath9k_htc: Firmware htc_9271.fw requested
usbcore: registered new interface driver ath9k_htc
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Switched to clocksource tsc
random: nonblocking pool is initialized
usbcore: registered new interface driver ath3k
usb 3-12.2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
usb 3-12.1: USB disconnect, device number 6
init: failsafe main process (651) killed by TERM signal
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input11
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input10
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input9
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.19 Tue Apr 29 19:58:58 PDT 2014
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (723) killed by HUP signal
init: cups main process ended, respawning
init: udev-fallback-graphics main process (799) terminated with status 1
ath9k_htc 3-12.2:1.0: ath9k_htc: HTC initialized with 33 credits
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
r8169 0000:05:00.0 eth2: link down
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
ath9k_htc 3-12.2:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Atheros AR9271 Rev:1
usb 3-2: new full-speed USB device number 8 using xhci_hcd
usb 3-2: New USB device found, idVendor=1532, idProduct=0101
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Razer Copperhead Laser Mouse
usb 3-2: Manufacturer: Razer
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input12
hid-generic 0003:1532:0101.0004: input,hidraw3: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-2/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input13
hid-generic 0003:1532:0101.0005: input,hidraw4: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-2/input1
nvidia 0000:01:00.0: irq 55 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
usb 3-12.1: new full-speed USB device number 9 using xhci_hcd
usb 3-12.1: New USB device found, idVendor=0cf3, idProduct=3005
usb 3-12.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver btusb
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1142) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 189 callbacks suppressed
type=1400 audit(1400600266.570:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2179 comm="apparmor_parser"
type=1400 audit(1400600266.570:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2179 comm="apparmor_parser"
type=1400 audit(1400600266.570:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2179 comm="apparmor_parser"